Products
Leeb Hardness Tester THL360
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Large 3 inch screen LCD, showing all functions and parameters. With EL background light.
- Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function.
- Test at any angle, even upside down.
- 12 month warranty
Leeb Hardness Tester THL360
Advantages
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Large 3 inch screen LCD, showing all functions and parameters. With EL background light.
- Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function.
- Test at any angle, even upside down.
- Large memory could store 500 groups (Relative to average times 32～1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.
- Battery information showing the remaining capacity of the battery and the charge status.
- Original imported high speed thermal printer supports immediate printing function. It can save data permanently.
- NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
- Auto power off to save energy.
Technical Specifications
Error and repeatability of displayed value:
| No. | Type of impact device | Hardness value of Leeb standard hardness block | Error of displayed value | Repeatability |
| 1 | D | 760±30HLD
530±40HLD |
±6 HLD
±10 HLD |
6 HLD
10 HLD |
| 2 | DC | 760±30HLDC
530±40HLDC |
±6 HLDC
±10 HLDC |
6 HLD
10 HLD |
| 3 | DL | 878±30HLDL
736±40HLDL |
±12 HLDL | 12 HLDL |
| 4 | D+15 | 766±30HLD+15
544±40HLD+15 |
±12 HLD+15 | 12 HLD+15 |
| 5 | G | 590±40HLG
500±40HLG |
±12 HLG | 12 HLG |
| 6 | E | 725±30HLE
508±40HLE |
±12 HLE | 12 HLE |
| 7 | C | 822±30HLC
590±40HLC |
±12 HLC | 12 HLC |
Measuring range：HLD（170～960）HLD
Measuring direction：0°~360°
Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS
Display：segment LCD
Data memory：500 groups max.（relative to impact times 32～1）
Printing paper: width is （57.5±0.5）mm, diameter is 30mm.
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period：about 150 hours（With backlight off, no printing）
Communication interface：USB2.0
Outline dimensions：
Configuration
Table 1-2
| No. | Item | Quantity | Remarks | |
| Standard Configuration | 1 | Main unit | 1 | |
| 2 | D type impact device | 1 | With cable | |
| 3 | Standard test block | 1 | ||
| 4 | Cleaning brush (I) | 1 | ||
| 5 | Small support ring | 1 | ||
| 6 | Battery Charger | 1 | 9V 500mA | |
| 7 | Paper for printing | 1 | ||
| 8 | Manual | 1 | ||
| 9 | Instrument package case | 1 | ||
| 10 | DataPro software | 1 | ||
| 11 | Communication cable | 1 | ||
| Optional Configuration | 12 | Cleaning brush (II) | 1 | For use with G type impact device |
| 13 | Other type of impact devices and support rings | Refer to Table 3 and Table 4 in the appendix. |
